Small 'D' Shaped Glass Clamp with Flat Base - Interior Use
Small 'D' Shaped Glass Clamp with Flat Base - Interior Use

Small 'D' Shaped Glass Clamp with Flat Base - Interior Use

£5.50
(Exc. 20% VAT)
£6.00
(£6.60 Inc. VAT)
6mm
8mm
10mm
Satin
Chrome Polished
Screw Cover Cap Option
+
Item Code
SK-510F4-S10
Overview

Small D-shaped Stainless Steel Glass Clamp with Flat Base to be fixed on a flat surface (e.g. square posts, wall, floor), a perfect solution for glass balustrades, partitions, railings, windbreaks, displays and sneeze guards. Feature: firmly holds glass without drilling holes in glass panels*.

    304 grade Stainless Steel, suits Interior Use

    Satin or Chrome Polished Finish

    Suitable for 6, 8 or 10mm glass

    Supplied complete with Secure Pin* x 1, Rubber Gasket x 2 and Side Reinforced Screws x 2

    Available with optional Screw Cover Caps

    Drilling hole in glass is optional (hole is required when using the Secure Pin**)

    Specification

    Material: Stainless Steel SUS304*

    Finish: Satin or Chrome Polished Finish

    Glass Thickness: 6 , 8 or 10mm

    Hole Drilling: Optional (drilling hole in glass is required when using the Secure Pin**) 

    Supplied with: Secure Pin* x 1, Rubber Gasket x 2 and Side Reinforced Screws x 2. (Optional Screw Cover Caps Available)

    * SUS304 grade Stainless Steel suits internal use; With increased corrosion resistance, the SUS316 grade Stainless Steel can be used for both interior and exterior and is better suited for coastal or more heavily polluted environments.

    ** For safety reason, we suggest the Secure Pin (supplied with your clamps) to be used when the glass panel is fixed to the outside of a staircase and overhanging.

    Please Note: All descriptions, specifications, diagrams, illustrations and dimensions given are approximate and intended for general guidance purposes only. They may be subject to change without prior notice. We make all reasonable efforts to ensure that the contents of this site are accurate and up-to-date, but can accept no responsibility for omissions, errors or subsequent changes.

    Assembly Guide

     
    The type of the screw needed will vary greatly depending on the type of surface you're fixing to (e.g. stainless steel post, wall, floor...). The above Hexagon Socket Head Cap Screw (M8) is the standard screw to be used when fixing the glass clamps to steel posts. You might want to choose the correct fixing screw with similar dimension as this.

    Below is a typical glass clamps application, to show the recommended positions for fixing the glass clamps. However we do have customers who prefer  fixing the clamps on top and bottom (e.g having a larger glass panel).

     
     Dimensions (mm)  Min.  Max.
     W  Width of Glass  500  1200*
     H  Height of Glass  800  1000*
     h1  Distance between handrail and top of the glass  10  50 without edge protection, 100 with edge protection
     h2  Distance between floor and bottom of the glass  10  50 without edge protection, 100 with edge protection
     h3  Glass edge above – axle upper glass clamp  100  150
     h4  Glass edge below – axle lower glass clamp  100  150

    *Max. Size depends on glass type, glass thickness and wind factor (when using outdoor).
    ** For safety reason, we suggest the Secure Pin (supplied with your clamps) to be used when the glass panel is fixed to the outside of a staircase and overhanging.

    Please note: All specifications are for reference purposes only and are subject to change without prior notice.

    Delivery

    This item can be delivered to all addresses within the UK and Northern Ireland (unless otherwise stated) as well as Channel Islands, Isle of Man, Isles of Scilly, Orkney, Shetland and Western Scottish Islands. We may be able to deliver to the Republic of Ireland or other selected EU countries.

     Delivery Zone Cost
    (ex. VAT)
     Timescale
    (Estimated Delivery Time)
     England, Wales & Scottish Mainland from £7.50 1 - 2 Working Day
     Scottish Highland from £9.50 2 - 5 Working Day (Certain remote areas may take longer)
     Northern Ireland from £9.50 2 - 4 Working Days
     Isle of Wight from £9.50 1-2 Working Days
     Other Area Please Contact Us for delivery cost and timescale

    Delivery Procedure:

    Your parcels will require a signature upon delivery. Please kindly ensure that there will be someone to sign for the parcel at the delivery address. If you are out you will be carded, please read the instructions on the card. After the very first attempt, you also have the option to collect the parcels from your local depot of the couriers.

    Timescales:

    The cut-off time for next working day deliveries is 14:00 Monday to Friday (excluding Bank Holiday). Please Note: We rely on a third party (our couriers), therefore we are unable to guarantee delivery services. However, over 98.5% of deliveries are achieved on time.

    Return:

    14 DAYS MONEY BACK GUARANTEE*: we at Kerol Hardware want you to be delighted with your purchase. Our aim is your total 100% satisfaction before and after you order. In the unlikely event should you wish to return an item(s), we offer you gladly 14 calendar days from delivery date in which to decide to keep your ordered item(s) or return it/them. *Terms & Conditions apply, please click here for details.

    More info >  Detailed Delivery Information can be found here. Detailed Return Policy can be found here.

    Customer Reviews (0)

    Be the first to Write a Review for this item!

    Also Bought
    NEW
    Ų50mm Stainless Steel Standoff

    Item Code: EST50-F6
    Glass thickness from 8mm, Standoff: 10, 20, 30, 40 or 50mm, Indoor & Outdoor

    BEST
    SELLER
    'D' Shaped Glass Clamp with Flat Base

    Item Code: GC-312F
    For 6, 8, 10 or 12mm glass, Satin Brushed or Mirror Polished, Suits Indoor or Outdoor

    Item Code: GC-612FX-90

    Satin Finish, Indoor or Outdoor Use, 8mm, 10mm or 12mm Glass

    Item Code: PL804-FG

    Hex Allen Key for Glass Clamps

    Item Code: KEY04

    Item Code: GCH10
    Aluminium, Undrilled, Length: 2410mm