BEST
SELLER

'D' Shaped Glass Clamp with Flat Base

£7.80
(Exc. 20% VAT)
(£9.36 Inc. VAT)
6mm
8mm
10mm
12mm
Stainless Steel Grade
No stock, discontinued
+
Item Code
GC-312F6-S10C
Similar Glass Clamp in Satin and Polished Finish for 10mm Glass can be found here.
Overview

Large D-shaped Stainless Steel Glass Clamp with Flat Base to be fixed on a flat surface (e.g. square posts, wall, floor), a perfect solution for glass balustrades, partitions, railings, windbreaks, displays and sneeze guards. Feature: firmly holds glass without drilling holes in glass panels*.

    304 grade Stainless Steel, suits Interior Use; 316 grade Stainless Steel, suits Interior & Exterior Use

    Chrome / Mirror Polished Finish or Satin Brushed Finish

    Suitable for 6, 8, 10 or 12mm glass

    Supplied complete with Rubber Gasket x 2, Side Reinforced Screws x 2 and Cover Caps x 2

    Drilling hole in glass is optional (hole is required when using the Secure Pin**)

    Specification

    Material: Stainless Steel SUS304* or SUS316*

    Finish: Mirror Polished Finish or Satin Brushed Finish

    Glass Thickness: 6 , 8, 10 or 12mm

    Hole Drilling: Optional (drilling hole in glass is required when using the Secure Pin**)

    * SUS304 grade Stainless Steel suits internal use; With increased corrosion resistance, the SUS316 grade Stainless Steel can be used for both interior and exterior and is better suited for coastal or more heavily polluted environments.

    ** For safety reason, we suggest the Secure Pin (sold separately) to be used when the glass panel is fixed to the outside of a staircase and overhanging.

    Please Note: All descriptions, specifications, diagrams, illustrations and dimensions given are approximate and intended for general guidance purposes only. They may be subject to change without prior notice. We make all reasonable efforts to ensure that the contents of this site are accurate and up-to-date, but can accept no responsibility for omissions, errors or subsequent changes.

    Assembly Guides

     
    The type of the screw needed will vary greatly depending on the type of surface you're fixing to (e.g. stainless steel post, wall, floor...). The above Hexagon Socket Head Cap Screw (M8) is the standard screw to be used when fixing the glass clamps to steel posts. You might want to choose the correct fixing screw with similar dimension as this.

    Below is a typical glass clamps application, to show the recommended positions for fixing the glass clamps. However we do have customers who prefer  fixing the clamps on top and bottom (e.g having a larger glass panel).

     Dimensions (mm)  Min.  Max.
     W  Width of Glass  500  1500*
     H  Height of Glass  800  1000*
     h1  Distance between handrail and top of the glass  10  50 without edge protection, 100 with edge protection
     h2  Distance between floor and bottom of the glass  10  50 without edge protection, 100 with edge protection
     h3  Glass edge above – axle upper glass clamp  100  150
     h4  Glass edge below – axle lower glass clamp  100  150

    *Max. size depends on glass type, glass thickness and wind factor (when using outdoor).
    ** For safety reason, we suggest the Secure Pin (supplied with your clamps) to be used when the glass panel is fixed to the outside of a staircase and overhanging.

    Please note: All specifications are for reference purposes only and are subject to change without prior notice.

    Delivery

    This item can be delivered to all addresses within the UK and Northern Ireland (unless otherwise stated) as well as Channel Islands, Isle of Man, Isles of Scilly, Orkney, Shetland and Western Scottish Islands. We may be able to deliver to the Republic of Ireland or other selected EU countries.

     Delivery Zone  Cost
    (ex. VAT)
     Timescale
    (Estimated Delivery Time)
     England, Wales & Scottish Mainland  from £7.50  1 - 2 Working Day
     Scottish Highland  from £9.50  2 - 5 Working Day (Certain remote areas may take longer)
     Northern Ireland  from £9.50  2 - 4 Working Days
     Isle of Wight  from £9.50  1-2 Working Days
     Other Area  Please Contact Us for delivery cost and timescale

    Delivery Procedure:

    Your parcels will require a signature upon delivery. Please kindly ensure that there will be someone to sign for the parcel at the delivery address. If you are out you will be carded, please read the instructions on the card. After the very first attempt, you also have the option to collect the parcels from your local depot of the couriers.

    Timescales:

    The cut-off time for next working day deliveries is 15:00 Monday to Friday (excluding Bank Holiday). Please Note: We rely on a third party (our couriers), therefore we are unable to guarantee delivery services. However, over 98.5% of deliveries are achieved on time.

    Return:

    14 DAYS MONEY BACK GUARANTEE*: we at Kerol Hardware want you to be delighted with your purchase. Our aim is your total 100% satisfaction before and after you order. In the unlikely event should you wish to return an item(s), we offer you gladly 14 calendar days from delivery date in which to decide to keep your ordered item(s) or return it/them. *Terms & Conditions apply, please click here for details.

    More info >  Detailed Delivery Information can be found here. Detailed Return Policy can be found here.

    Customer Reviews (0)

    Be the first to Write a Review for this item!

    Also Bought
    Rubber Profile for Cap Rail (Price per Metre)

    Item Code: RUB4RAIL

    Item Code: PS-0W

    Threaded Wood Insert Nut

    For Timber Fixing

    Item Code: BFH-065-T

    Hexagon Socket Head Cap Screw

    Size: M8 or M10, For Timber Fixing